PCS-400-XY: Programmable Pump Controller
Features:
|
Function:
The PCS-400 is a universal pump controller that can control up to 4 pumps. It has a single analog input that can be connected to a field transmitter either as a 2-wire or 3-wire input. The 4 digit LED display is scalable to any range from 0000-9999 (plus decimal point).
Pumps can be configured to operate on a rising input signal ( e.g. to drain a well) or on a falling input signal (e.g. to fill a tank). Each pump has its own programmable start and stop level as well as a start and stop delay.
The PCS-400 can operate pumps in a sequential mode where pump no.1 is always the first pump to start or in an alternating mode where the start pump is different for every cycle.
An auxiliary alarm level with its own contact output and horn is also available. A signal re-transmit output provides a process signal for further use.
Specifications:
- Accuracy: +/- 0.1% typ., +/-0.2% max.
- Operating Temperature: -4°F to +140°F (-20°C to +60°C)
- Relay Contacts: 10A 1/8Hp @ 125VAC, 6A 1/8Hp @ 277VAC
- Power: 117 VAC, 60/50 Hz, 24VDC Available
- Enclosure: NEMA4X
Manuals: